If you want to experience the pride of owning something from Chris King, these seatpost collars will tick that box, whether you’re looking to complete a set and match your hubs, headset and bottom bracket or simply add a pop of colour and class to your bike.

They’re beautifully machined and anodised, then finished with the King wordmark and a little bee logo, etched on the barrel nut, for that extra bit of buzz.

Choose from 10 of Chris King’s current colourways, as well as four size options.

• An anodised collar to hold your seatpost firmly in place
• Available in a wide range of colours
• Clamp from aluminium, bolt and barrel nut stainless steel
• Torque spec 6Nm max
• Available in the following sizes:
  • 30.0mm
  • 31.8mm
  • 34.9mm
  • 36.4mm

Technical Specifications

• Aluminium collar with stainless steel bolt, washer, and barrel nut
• Available in four sizes: 30.0, 31.8, 34.9, 36.4
• Made in the USA
• Lifetime Warranty

Installation

• Measure the seat tube of your frame to ensure proper fit before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example, a 30.0 Seatpost Collar should fit a seat tube outer diameter of 29.5mm up to 30.5mm).
• These measurements refer to the outside diameter of the seat tube of your frame, NOT the seatpost dimension.
• We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminium, steel, or titanium frames.
• Maximum Torque is 6nm.
• Clamp Height: 15.88mm and Clamp Height to Inner Lip: 14.35mm.
• The bolt and barrel nut of each King Seatpost Collar come with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.