This is a 96mm BCD chainringfor a 1X chainring for XTR M9000 crankset with the proven chain retention of ourDrop-Stop chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline.

• Fits96 BCDXTR M9000 and M9020 cranksets

• Drop-Stop technology. On Wolf Tooths patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.

• Alternating wide/narrow tooth pattern prevents chain derailment

Compatibility

• These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets
• Use only the stock Shimano XTRchainring bolts (M7x.75)
• You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainrings standoffs from the outside of the crankset

• For 1×9, 1×10, 1×11 and 1×12 drivetrains (including SRAM Eagle)

  • If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention)
• Chainline -49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes

Recommendations

• If you plan to ride in very muddy conditions, we recommend achainguideorchainkeeperin addition to a clutch-type rear derailleur. Without these precautions, you may experiencechaindropsand/orchainsuck.

Related Products

Chainring bolts

Tech Specs

Weight: 32t 50g |34t 59g|36t 69g
Material:7075-T6 aluminum
Made in theUSA

Patent and trademark information